Skip to end of metadata
Go to start of metadata

 

About Camera Splitters

Before you start seeking for splitter applications, please note that Jasmin Cam Standalone version allows you to be online with multiple accounts on the Site.

One camera can be used only by one application in the same time. If you wish to use your camera with more applications simultaneously you need a camera splitter program. The splitter will divide the signal of your camera between the different applications which will allow you to use them at the same time while broadcasting your camera image. 

 

 

NOTE: With the multi-login feature you can use 2 Jasmin accounts at the same time without a camera splitter software. 


Feel free to contact us via Online Support any time you need assistance for setting details.

VISIT-X Video Splitter

This splitter is highly recommended by us, it provides fluent camera picture and fully compatible with our site. 

You can download the recommended version here: VISIT-X-Video-Splitter-9.0.1.3.exe (right-click on the link and hit "Save link as...")

Please, note that this version of Visit-X Splitter will not work with you current system perfectly therefore your image could be pixelated.
 Autoupdate: Make sure you untick the box of the autoupdate so your Visit-X will be working with our software.

After downloading the program, you will find its icon on the taskbar in the right corner:

When you launch VISIT-X this settings panel will pop up:

 

Main menus:

  • Camera: You can select your camera here as source.
  • Format: You can adjust the resolution. We suggest to choose 'wide' 864x480, 864x486 or 640x360 resolution for the perfect image.
  • FPS: You can also adjust the frame rate here, 30 Fps is the required value as a setting here in order to have a continuous image.
  • Extras: Deinterlace, brightness, contrast and color settings.

    Deinterlacing: If you notice lines in your video feed, it means that your image is "interlaced". The deinterlace feature helps to reduce these lines.
      
     

How to setup Visit-X and JasminCam?

  1. Open your Visit-X Splitter software.
  2. Select your webcamera below the „Camera” sign from the drop down menu.
  3. Choose the desired resolution and 30FPS next to „Format”. Then click „OK”.
  4. Open the JasminCam standalone software and choose „Visit-X Video Splitter” as the source of the video feed.
  5. Make sure that the „Audio Device” in JasminCam is the Microphone of your camera.
  6. Choose the same resolution as in your splitter, with 30FPS and 850bitrate in JasminCam next to „Video Quality”.

Tips:

  • Ticking the box of „Preview” you can see your actual image. 
  • VISIT-X can be completely closed with the Exit button. 
  • You can enable 'Launch on startup' thus the Visit-X will be opened right after your system starts.
  • After clicking on 'Default' in 'Extras' you can have all your settings on factory levels.

Verysoft Webcamsplitter

A camera splitter program which supports most camera types. The full version costs 19.95$ The application appears only among the task bar icons, where you can adjust its settings. This splitter works the best with our recommended handycams and camcoders.

You may download the splitter form here: http://very-soft.com/product/webcamsplitter 


After downloading the program, you will find its icon on the taskbar in the right corner.

 

Main menus:

You can select the menus by right clicking on the VerySoft WebCamSplitter icon on the task bar.

 

  • Source: Select the input source of the splitter. (Should be you capture card in case of handycam.)
  • Resolution: Select from a wide range of resolution formats.
  • Source Settings: Open the settings window of your selected source device.
  • Capture: Enables/disables the splitter.
  • Output Settings: Opens a preview window where the resolution, fps and aspect ratio are displayed also you can adjust the brightness, contrast and saturation.
  • Options: Opens the option menu where you can set the global frame per seconds limit, snapshot timeout, deinterlace etc....
  • Help: Support of the software and here you can also activate the full version product. 

 

How to setup Verysoft Webcam Splitter with JasminCam?

  1. Right click on the icon of your Verysoft Webcam splitter on the taskbar.
  2. Select your camera as 'Source'.
  3. Choose 864x480 or 864x486, depending on your camera, as resolution from „Source Resolution”.
  4. Go to „Options” and make sure that the "Global FPS limit" is set to 30 and enable "Constant Output FPS".
  5. Make sure that the „Transformation mode” is „Crop” and the „Deinterlacer” is „Always off”.
  6. Open the JasminCam and select „Verysoft Webcam Splitter” as „Cam Device”.
  7. Make sure that the „Audio Device” in JasminCam is the Microphone of your camera.
  8. Choose the same resolution has been set in your splitter with 30 FPS and 850 bitrate in JasminCam next to „Video Quality”.
  9. Enable "Constant output FPS".

Tips:

  • You could adjust your color settings, contrast, and brightness. Right click on he icon of the Verysoft Webcam Splitter then „Output Settings”. You can access to the settings when you are at the third icon from left (Color Correction) or you could simply push CTRL + C at the same time.
  • You could reset your color settings to default with CTRL + Alt + C key combinations. You can do the the same with your zoom after pushing CTRL+Alt+Z at the same time.
  • Always check if the Global FPS limit was not set to a lower value. Set it to 30 to achieve a better quality. 


Deinterlace: if you notice lines in your video feed, it means that your image is "interlaced". The deinterlace feature helps to reduce these lines. Usually appears when you use camcorder or handycams.

Xsplit Splitter

The Xsplit splitter handles both handycams and webcameras very well. There are two versions, one called Personal, which has 4.95$ monthly fee. The other, namely, Premium has 8.95$ monthly fee. In terms of features the latter has more thus we recommend to choose that. You can only broadcast to several sites with Premium subscription simultaneously.

Main Menus:

  • File: You can add devices under 'File' menu by click on 'Add camera'.
  • View: Resolution and FPS can be set from here.
  • Broadcast: In the 'Broadcast' menu you are able to record your camera image to your hard drive.
  • Tools: You can reach your previous recordings and general settings here.
  • Help: Activate your licence from 'Help' option.


Once you have added your camera as source you will be able to open the settings by right clicking on the preview:

It is important to set the 854x480 resolution in View menu in order to be able to adjust the settings.

On the layout tab you could adjust the resolution manually, it is important to have lock position enabled. Make sure that both 'X' and 'Y' axis is on '0'.

You can adjust your color settings, brightness and contrast under the same panel’s 'Color' tab.

How to setup your JasminCam with Xsplit Splitter?

  1. Open the Xsplit Splitter and Log in with your Credentials.
  2. Click on „File” then „Add” here select your camera.
  3. Choose 854x480 as resolution from „View” and make sure you have the same when you right click on your image at the „Layout” tab.
  4. Go to „View” and make sure that the „FPS" is set to 30.(25 in case of Handycams)
  5. Make sure you have your audio selected in Tools, General Settings option.
  6. Open the JasminCam and select „XSplitBroadcaster” as „Cam Device”.
  7. Make sure that the „Audio Device” in JasminCam is the Microphone of your camera.
  8. Choose 864x480 with 30FPS and 850bitrate in JasminCam next to „Video Quality”.

Tips:

  • Click on 'Tools' then 'General Settings', here you have an overview and the audio settings could be found here as well.

 

Feel free to contact us via Online Support any time you need assistance for further setting details.

Go to the Top

Labels
  • None